The management of the project-based organization: A personal reflection

In this paper I make a personal reflection on my research and writings in the field of Project Management over the past 30 years. My research has primarily been about the management of the project-based organization. Within that I have researched governance, organizational behaviour, contingency, marketing, success and shareholder value.     

Review on nano-and microfiller-based polyamide 6 hybrid composite: Effect on mechanical properties and morphology

Polyamide 6 (PA6)-based composites are of evolving interest due to its high strength, wear resistance, and barrier properties. The use of binary composites mostly with nanomaterial and glass fibers has been reviewed and presented in literature. However to obtain a balance of properties like stiffness, toughness, and strength along with cost reduction, ternary composites of PA6 have been designed. To achieve the balance, PA6 blend-based composites, with combination of microfiller/nanofiller or PA6 with combination micro-microfiller, PA6 with microfiller/nanofiller and fiber have been designed. The properties of PA6-based ternary hybrid composites depend on type of dispersed phase used, presence of compatibilizer, type of filler used (nanofiller or microfiller or fiber or hybrid) and combination of fillers used. However, a review in this direction is not available in literature. Here, in this study, an overall understanding of various fillers, dispersed phase, and their combinations can be understood along with the discussion on effect of these on tensile properties and morphology of hybrid composite. In this study, an attempt has been made to review the various fillers and dispersed phase and their combinations which have been used in designing the PA6 hybrid composite with good balance of stiffness, toughness, and strength.     

一种高性能低VOC尼龙6复合材料的研究

通过研究基料、无机填料、增韧剂、润滑剂对尼龙6(PA6)复合材料的物理性能、VOC的影响,得到一种高性能低VOC的PA6复合材料。结果表明:以PA6 IM为基料、滑石粉为无机填料、EPDM 3092M为增韧剂、E525为润滑剂的尼龙6复合材料,具有高性能、低VOC的优点。     

Comprehensive performance evaluation of distributed and dynamic mobility routing strategy

In this paper, we conduct a comprehensive performance study of distributed and dynamic mobility management (DDMM). DDMM presents a new architectural paradigm for a sustainable mobile networking against an ever-increasing amount of Internet data traffic, providing IP mobility management with distributed deployment of mobility anchors and dynamic activation when mobility is needed. Such a distributed mobility management concept is generally and intuitively accepted in terms of effective distribution of mobile traffic when compared with centralized mobility management (CMM) approaches. Nevertheless, the routing strategy of DDMM has not yet been properly examined through performance studies, and especially the impact of potential mobility routing strategies on the user plane is an open question. We perform a mathematical analysis of DDMM and present numerical results aiming to identify in which conditions, by which factors, and how much, DDMM improves mobility performance. For comparison, Mobile IPv6, Proxy Mobile IPv6 (PMIPv6), and PMIPv6 localized routing (PMIPv6-LR) were considered as representative IP mobility protocols following CMM approaches. Analytical results demonstrate that DDMM generally achieves higher performance when compared with CMM-based protocols in terms of packet delivery cost, tunneling overhead, and throughput, but specific performance varies in function of multiple input parameters.     

基于三维胞元空间的MA双向并行路由算法

针对传统移动代理(MA)在监测无线传感器网络(WSNs)的感兴趣信息时产生的延迟较大和能耗较多问题,提出了基于三维胞元空间的MA双向并行(3D-BPMA)路由算法.3D-BPMA将MA与传统的客户/服务器(c/S)模式相结合,在胞元内利用C/S模式搜集信息,在单层胞元系统和路由器与路由器之间采用MA双向并行的策略进行传输.仿真结果表明:3D-BPMA与LCF,DSG-MIP算法相比减少了平均响应时间和网络平均能耗,提高了MA发送率.     

REST API技术及在移动通信网络管理中的应用

介绍了目前最炙手可热的REST架构风格，该风格顺应Web2.0的兴起，完美的匹配了云计算时代来临的可扩展要求，在各种应用场景中都得到了充分的表现。根据其技术特点，分析了该风格的API在移动通信网络管理中的应用，从网管系统内部、网管系统之间以及网管系统与上层APP应用之间等多方面对是否适用于REST风格以及如何在合适的位置使用REST API进行了分析。     

Fretting fatigue tests on shrink-fit specimens and investigations into the strength enhancement induced by deep rolling

The shrink-fit connection undergoes fretting fatigue at the edge of the contact, where both stress concentration and micro-slip take place. A fretting test set-up with a round-shaped specimen is proposed that eliminates lateral edge contact and misalignment, and is also appropriate for deep rolling. Comparative experiments showed a notable strength improvement, induced by deep rolling, along with the beneficial effect of friction reduction due to lubrication. Multiple cracks with clear shallow paths were evident after SEM observation, thus the maximum shear stress amplitude was assumed as a correlating parameter, while the crack arrest was inappropriate especially for deep rolled specimens.     

矿用可移动式救生舱的构成及安放

该文对矿用可移动式救生舱进行了分类,对比了各自的优缺点,指出国内厂家和高校均以硬体式救生舱作为主要研究对象;随后着重对此种救生舱的总体构成进行了说明,介绍了过渡舱、生活舱和设备舱的具体功能和内部设备;最后论述了几种固定和安放方式的利弊,指出在实际应用中,应根据所在巷道的地质特点合理选择安置方案。     

Rapid crystallization of poly(ethylene 2,6-naphthalate) via aryl amide derivatives

ABSTRACT

A very small amount of aryl amide derivative (TMB-5) was used for nucleating Poly(ethylene 2,6-naphathalate) (PEN) by melt blending. The crystalline temperature, crystallinity, and nucleation efficiency of the composites were increased as a result of the addition of TMB-5. The half-time of crystallization decreased upon the addition of TMB-5 and the work required in folding polymer chains were reduced simultaneously in the polymer mixtures. The crystal size of the PEN/TMB-5 blends became smaller due to the increase of nucleation sites. The TMB-5 had no effect on the PEN crystal type. TMB-5 slightly increased the impact strength of PEN.     

New observations on wear characteristics of solid Al2O3/Si3N4 ceramic tool in high speed milling of additive manufactured Ti6Al4V

Additive Manufacturing (AM) technologies applied to the titanium alloys have attracted attention from industries in recent years. Despite one of the main goals of AM is the reduction of manufacturing steps, semi-finish/finish machining operations are still required so as to obtain the desired geometrical tolerance and surface features. In this study, the solid end mill was manufactured by Al₂O₃/Si₃N₄ (Sialon) ceramic materials and employed in high-speed slot milling of Ti6Al4V alloy fabricated by the Direct Metal Laser Sintering (DMLS) AM technology to study the tool wear characteristics during processing. The Raman spectroscopic method was employed to characterize the molecular structures of Sialon ceramics for the manufacturing of the cutting tool. The morphologies and elemental maps of wear region of the ceramic tool were examined by scanning electron microscope and energy dispersive spectroscopy techniques. The results show that the adhesion wear and diffusion wear are the dominant wear mechanisms, and the chemical stability of Al₂O₃/Si₃N₄ (Sialon) ceramics fabricated as the solid ceramic tool to the attack of the atoms from additive manufactured Ti6Al4V is relatively weak under the atmosphere. The difference of thermal expansion coefficients of diffusion layer and tool substrate accelerates the initiation and propagation of thermal cracks formed on the diffusion interface. Moreover, fracturing and crater-like groves near the tool edge were finally formed due to the removal of adhered workpiece material.